Analytical Industries Palm CO Carbon Monoxide Analyzer

Analytical Industries Palm CO Carbon Monoxide Analyzer

$536.99

Available on backorder

Description

Analytical Industries Palm CO Carbon Monoxide Analyzer

Analytical Industries Palm CO Carbon Monoxide Analyzer is a palm size PPM carbon monoxide analyzer measures CO concentrations from 1 to 25 PPM.

The handheld Palm CO features an advanced electrochemical CO sensor, a 24 month operating life with no maintenance required, 13,000 hours of battery use, and a wide variety of optional accessories make it an ideal cost effective choice for checking CO in breathing gas.

The Palm CO is ideal for recreational divers going on vacation where air quality can be questionable at best.

Suitable for divers using air as a breathing mix or for mixed gases such as nitrox or trimix, the new AI CO analyzer is a welcome addition to DDS and something we’ve been waiting for for a very long time, since the Analox CO analyzer was short lived.

Accuracy: < +1 PPM under constant conditions Analysis: 0-50 PPM CO
 Application:  Verify CO in breathing gas  Calibration:  CO bump test
Compensation: NA Connections: 1×16 mm thread (see options below)
 Controls:  Soft touch keypad for ON/OFF and Calibration  Dimensions:  2.72” x 4.1” x 1.35”; weight 7 oz. (196 grams)
 Display:  3 digit LCD 1.1” x .625”; resolution 1 PPM CO  Flow Sensitivity:  None between 0.2 to 10 liters per minute
 Humidity:  Non-condensing 0-95% RH  Linearity:  +1% under constant conditions
 Pressure:  Inlet – ambient or regulated; vent – atmospheric  Power:  2 x 1.5 V AA alkaline batteries; 13,000 hrs of use
 Response Time:  90% of final FS reading in 30 seconds  Sensitivity:  1 PPM
 Sensor:  AII-CO  Sensor Life:  24 months in air at 25ºC and 1 atmosphere
 Storage Temp.:  -20º to 60ºC (-4ºF to 140ºF) on intermittent basis  Temp. Range:  5º to 45ºC (41ºF to 113ºF)
 Warm-up Time:  None  Warranty:  12 months analyzer; 12 months sensor

 

Additional information

Weight 2 kg
Dimensions 24 × 24 × 16 cm