Ammonite ACCU THERMO TYPE 24 Special

Ammonite ACCU THERMO TYPE 24 Special

$1,735.00

Description

Ammonite ACCU THERMO TYPE 24 Special

Ammonite Accu Thermo Type 24 Special battery offers reinforced construction for the most demanding divers.  The “Special” version is built to withstand pressure up to 200msw.

Simple and intuitive control, efficiency, and the highest possible durability distinguish ACCU THERMO from other devices on the market of modern diving equipment.

ACCU THERMO has two connection ports. They’re located at the top part of the casing.
One port with a permanently installed E / O cord (cords with wet connector) is to be used only for the heated dive wear.

The LED indicator is located on the top cover of the battery and it informs the user about the battery charge level and the operating status of the entire system.

The three-stage power control (0/70% / 100%.) ensures the effective management of energy and allows for extended battery life.

The power is regulated by a large magnetic switch. It has a distinct step, noticeable even with thick gloves on.

The LED indicator is located on the top cover of the battery and informs the user about the battery charge level and the operating status of the entire system.

After the power is turned on, the indicator first lights up for 4 seconds, providing information about the battery charge level:

  • Green, steady: 75%-100% charge capacity
  • Green, blinking: 50%-75% charge capacity
  • Red, blinking: 25%-50% charge capacity
  • Red, steady: less than 25% charge capacity

It is an electronic circuit that protects the E / O cord (the metal pins in the E / O cord connector) against the harmful effects of electrolysis.
When ACCU THERMO is not connected to any receiver (e.g., a heated vest), there is no voltage on the wet connector (E/O cord end).

Thanks to the „intelligent E/O”, voltage is cut off automatically also when the cord gets unplugged during operation.
This way, anytime the unconnected E/O cord is in the water, an electrical current doesn’t pass through its pins, making the system safe from damage.

KIT CONTAINS:

– CHOSEN ACCU THERMO – CHARGER
– WEBBING LOOP MOUNT – SILICONE GREASE

– 2 SPARE O-RINGS
– MANUALS AND CERTIFICATE – SILICONE BAND
– BLIND PLUG FOR E/O CORD

Burn Times:

Gloves (30w) 12hr

Vest (55w) 6:35hr

Vest & Gloves 4:15hr

Heated Undersuit 3:20hr

Buy Ammonite Heater packs, lights and accessories online in Canada with Free Shipping from Dan’s Dive Shop, a Top Stocking Dealer.

Additional information

Weight 7 kg
Dimensions 40 × 28 × 16 cm