Description
Used Sea & Sea YS-D3 MK II Lightning Strobe DemoWe have a Used Sea & Sea YS-D3 MK II Lightning Strobe Demo that was used for a couple of trips last year (Red Sea and Malta). Unit is in excellent condition. This model offers superior brightness and the performance you’d expect from a Guide Number 33 Underwater Strobe. The quality that made Sea & Sea the original innovator and pioneer of underwater strobe lights is back in a big way with this fantastic, lightweight, powerful underwater photography strobe light.
The Newly Updated Version of the Sea & Sea YS-D3 MK II Lightning Strobe enhance TTL shooting and third-party optical converter compatibility while still retaining all the great features, such as a 33 Guide Number, wide Beam Angle and broad flash distribution of the original D3
The new MKII model will be a “running change” update, that is, the product number (#03123), will remain the same.Features of the YS-D3MKII model
- Newly developed software enables compatibility with existing and previous Sea&Sea optical converters. TTL shooting with the YS-D3MKII can now be enjoyed using the YS-D2 position on the S&S optical converter.
- A newly designed circuit improves the accuracy of TTL light intensity with compact cameras and also provides greater compatibility with third-party Optical TTL converters.
- The design of the light intensity adjustment dial and mode switch has been revised for better useability in all diving environments.
The difference can be easily recognized from the outside by the MKII label on the side of the unit and the new control knobs on the rear.
-
High Performance Strobe
Newly designed circuitry and light-emitting unit produces powerful guide number of 33. In addition, a high precision aspherical optical troidal lens has been fitted over the two flash tubes to disperse an even light from the center to the edge. The strobe`s beam angle will increase to 110°by attaching the standard accessories Diffuser. When the optional Dome diffuser is attached, beam angle will increase to as wide as 150(TBD)
In order to avoid misunderstanding, the YS-D3 guide number (GN) and the beam angle are based on measurements taken on land (not underwater)Some competitors will often state a GN measured on land and the beam angle in water, for example a GN 33 and beam angle of 110 degrees. However, this GN 33 value is based on a beam angle of 60~70 degrees. The beam angle may be expanded in water by a dome effect, however the GN in water is significantly lower than the value measured on land.Note: A land-based strobe that uses the same four AA batteries as the YS-D3 may provide a notation that the GN is 60, but these measurements are taken under the condition that the focal length is equivalent to 200 mm (= beam angle 12 °). When the beam angle becomes narrower, the brightness of the illuminated area increases due to the light-collecting effect.
Aspherical optical troidal lens -
Superior consecutive firing capability to capture those critical moments.The YS-D3 utilizes larger capacity condensers compared with those used on competing strobes. In addition, the D3 is also equipped with a newly designed charging circuit. As a result, the YS-D3 will fire at GN16 continuously without any interval time. Even when the strobe is fired at GN22, the strobe will fire again within a mere 0.8 seconds.When the YS-D3 is fired at Guide Number over 22, a two-stage ready-to-fire signals will be issued. For instance, after the strobe fires at full power of GN33, the strobe will inform you both visually and audibly when the condenser is charged to fire at GN22. Then, when the condenser is charged enough to fire at GN33, another different signal will be issued. This design allows you to release more shutters in scenes where you want to shoot as many pictures as possible, maximizing shooting intervals between scenes
Make your underwater photos look richer with more natural colour and enjoy a deeper depth rating as deep as 328′.
Target light with increased power
Various accessories available for all underwater imaging experiences
-
Excellent visibilityBacklight panel that is effective when shooting in dark environments The indicator color on the back of the YS-D3 changes each time the position of the mode switch is changed. Blue (in DS-TTLII mode), light blue (in slave TTL mode), orange (in manual mode with pre-flash), and green (in manual mode without pre-flash) The positioning of the operation system is obvious during night diving.* The color in DS-TTLII mode has been changed from the YS-D2 to match the color with the optical converter.
In DS-TTLII mode
In manual pre-flash mode
In manual non pre-flash mode -
Connection method with arm that can be selected according to preferenceYS-D3 comes with a straight type ball base.Optional YS base and new Diagonal ball base can be installed depending on the application.YS base (common to YS-D1 / D2 / D3)Traditional YS base. Easy vertical swing.Diagonal ball base (only for YS-D3)A ball base inclined at 35 ° compared to the straight type. This makes it easier to lower the strobe backwards, making it suitable for shooting when using a dome port. Also, when a Synchro Cord N is installed, interference between the cord and the ball clamp is minimized.
YS base
Diagonal ball base
Diagonal ball base system example -
SEA&SEA YS-D3 TTL firmware update Notice / Not applicable to YS-D3MKIIYS-D3 Strobe #03123 Sea&Sea has made changes to the TTL software in all models from serial numbers #180701320.
The update is to address an overexposure when opening the aperture to lower f stops in compact cameras and address compatibility with 3 party TTL converters.
Please note that this software update is only to address the TTL function.
Customers with a YS-D3 model with a serial number prior to #180701320 may require an update.
Please contact your local Sea&Sea Dealer or Sea&Sea Distributor for information on updating your strobe. -
Sea&Sea Optical Converter Firmware Update for YS-D3 / Not applicable to YS-D3MKIISea&Sea has now released firmware for updating existing S&S Optical Converts already in the field to enable YS-D3 compatibility.
In order to update existing S&S Optical Converters, please contact your local Sea&Sea Dealer or Sea&Sea Distributor.
Please note that the YS-110α position is utilized on existing Optical Converters for YS-D3 functioning.The following Optical Converters, shipping from October 2020, are updated for D3 compatibility. Updated Optical Converters are distinguished by a “D3” position.# 50126 YS Converter N1 for MDX Housing Nikon
# 50142 YS Converter C2 for MDX Housing Canon SLR
# 50143 YS Converter CR for MDX Housing Canon Mirrorless
# 50139 YS Converter S1 for MDX Housing Sony Note: After completing the update on existing units in the field and all Optical converters shipping after October 2020 will not be compatible with the YS-110αstrobes.
KEY FEATURES:
YS-D3 MKⅡ LIGHTNING
Buy Sea & Sea Underwater Strobes, Underwater Camera Housings, Sync Cords and Accessories Online in Canada from Dan’s Dive Shop, a Top Stocking Sea & Sea Dealer.