Agir-Brokk 38lb Double Tank Wing

Agir-Brokk Habrock 38lb Doubles Wing: Priced in Canadian Dollars.

The Agir Harbrock Doubles wing is a great wing that features rugged nylon-coated Cordura which isa very strong material and easy to keep clean. The design and cut reflect the modern diving philosophy in being simple, hardwearing and with the best of in-water performance. Our wing-pattern is carefully adjusted to enhance built-in balance for effortless diving and trim. Also every detail on all five models is scrutinized to give you high comfort. AGIR wings are the first wings designed specifically for European (e.g. Faber and Eurocyl.) double cylinders.

To strengthen the outer shell, the pattern pieces are sewn together and then folded and sewn again to prevent tearing.

The over pressure relief valve position is chosen to release gas effectively and be easy to pull-dump using a 3mm dinghy-line, 130mm/5 inches long with just two knots for good grip and no snag.

For drainage two eyelets are placed on each bottom/side of the wing. They are 15mm/0,5 inch in diameter and made of coated brass.

The design makes perfect room for the backplate. The backplate will rest on three layers of cordura with its contours outlined with a double seam on the wing. This way the wing is protected from being squeezed and possibly damaged. AGIR wings are furnished with optional holes for optimum trim.

To strengthen the outer shell, the pattern pieces are sewn together and then folded and sewn again to protect from tearing.

For drainage two eyelets are placed on each bottom/side of the wing. They are 15mm/0,5 inch in diameter and are made of coated brass.